fmgr_firewall_address – Configure IPv4 addresses.

New in version 1.0.0.

Synopsis

  • This module is able to configure a FortiManager device.
  • Examples include all parameters and values need to be adjusted to data sources before usage.
  • Tested with FortiManager v6.x and v7.x.

Requirements

The below requirements are needed on the host that executes this module.

  • ansible>=2.9.0

FortiManager Version Compatibility


6.0.0
True
6.2.0 6.2.1 6.2.2 6.2.3 6.2.5 6.2.6 6.2.7 6.2.8 6.2.9 6.2.10
True True True True True True True True True True
6.4.0 6.4.1 6.4.2 6.4.3 6.4.4 6.4.5 6.4.6 6.4.7 6.4.8 6.4.9 6.4.10 6.4.11
True True True True True True True True True True True True
7.0.0 7.0.1 7.0.2 7.0.3 7.0.4 7.0.5 7.0.6 7.0.7
True True True True True True True True
7.2.0 7.2.1 7.2.2
True True True
7.4.0
True

Parameters

  • access_token -The token to access FortiManager without using username and password. type: str required: false
  • bypass_validation - Only set to True when module schema diffs with FortiManager API structure, module continues to execute without validating parameters. type: bool required: false default: False
  • enable_log - Enable/Disable logging for task. type: bool required: false default: False
  • forticloud_access_token - Access token of forticloud managed API users, this option is available with FortiManager later than 6.4.0. type: str required: false
  • proposed_method - The overridden method for the underlying Json RPC request. type: str required: false choices: set, update, add
  • rc_succeeded - The rc codes list with which the conditions to succeed will be overriden. type: list required: false
  • rc_failed - The rc codes list with which the conditions to fail will be overriden. type: list required: false
  • state - The directive to create, update or delete an object type: str required: true choices: present, absent
  • workspace_locking_adom - Acquire the workspace lock if FortiManager is running in workspace mode. type: str required: false choices: global, custom adom including root
  • workspace_locking_timeout - The maximum time in seconds to wait for other users to release workspace lock. type: integer required: false default: 300
  • adom - The parameter in requested url type: str required: true
  • firewall_address - Configure IPv4 addresses. type: dict
    • allow-routing - Enable/disable use of this address in the static route configuration. type: str choices: [disable, enable] more...
    • associated-interface - Network interface associated with address. type: str more...
    • cache-ttl - Defines the minimal TTL of individual IP addresses in FQDN cache measured in seconds. type: int more...
    • color - Color of icon on the GUI. type: int more...
    • comment - No description for the parameter type: str
    • country - IP addresses associated to a specific country. type: str more...
    • dynamic_mapping - Dynamic_Mapping. type: array more...
      • _scope - _Scope. type: array more...
        • name - Name. type: str more...
        • vdom - Vdom. type: str more...
      • allow-routing - Enable/disable use of this address in the static route configuration. type: str choices: [disable, enable] more...
      • associated-interface - Network interface associated with address. type: str more...
      • cache-ttl - Defines the minimal TTL of individual IP addresses in FQDN cache measured in seconds. type: int more...
      • color - Color of icon on the GUI. type: int more...
      • comment - No description for the parameter type: str
      • country - IP addresses associated to a specific country. type: str more...
      • end-ip - Final IP address (inclusive) in the range for the address. type: str more...
      • end-mac - Last MAC address in the range. type: str more...
      • epg-name - Endpoint group name. type: str more...
      • filter - Match criteria filter. type: str more...
      • fqdn - Fully Qualified Domain Name address. type: str more...
      • interface - Name of interface whose IP address is to be used. type: str more...
      • obj-id - Object ID for NSX. type: str more...
      • organization - Organization domain name (Syntax: organization/domain). type: str more...
      • policy-group - Policy group name. type: str more...
      • sdn - SDN. type: str choices: [aci, aws, nsx, nuage, azure, gcp, oci, openstack] more...
      • sdn-addr-type - Type of addresses to collect. type: str choices: [private, public, all] more...
      • sdn-tag - SDN Tag. type: str more...
      • start-ip - First IP address (inclusive) in the range for the address. type: str more...
      • start-mac - First MAC address in the range. type: str more...
      • subnet - IP address and subnet mask of address. type: str more...
      • subnet-name - Subnet name. type: str more...
      • tags - Tags. type: str more...
      • tenant - Tenant. type: str more...
      • type - Type of address. type: str choices: [ipmask, iprange, fqdn, wildcard, geography, wildcard-fqdn, dynamic]
      • url - Url. type: str more...
      • uuid - Universally Unique Identifier (UUID; automatically assigned but can be manually reset). type: str more...
      • visibility - Enable/disable address visibility in the GUI. type: str choices: [disable, enable] more...
      • wildcard - IP address and wildcard netmask. type: str more...
      • wildcard-fqdn - Fully Qualified Domain Name with wildcard characters. type: str more...
      • _image-base64 - _Image-Base64. type: str more...
      • clearpass-spt - SPT (System Posture Token) value. type: str choices: [unknown, healthy, quarantine, checkup, transition, infected, transient] more...
      • fsso-group - FSSO group(s). type: str more...
      • sub-type - Sub-type of address. type: str choices: [sdn, clearpass-spt, fsso, ems-tag, swc-tag, fortivoice-tag, fortinac-tag, fortipolicy-tag, device-identification] more...
      • global-object - Global-Object. type: int more...
      • obj-tag - Obj-Tag. type: str more...
      • obj-type - Obj-Type. type: str choices: [ip, mac] more...
      • fabric-object - Security Fabric global object setting. type: str choices: [disable, enable] more...
      • macaddr - Macaddr. type: str more...
      • node-ip-only - Enable/disable collection of node addresses only in Kubernetes. type: str choices: [disable, enable] more...
      • dirty - To be deleted address. type: str choices: [dirty, clean] more...
      • pattern-end - No description for the parameter type: int more...
      • pattern-start - No description for the parameter type: int more...
      • tag-detection-level - Tag detection level of dynamic address object. type: str more...
      • tag-type - Tag type of dynamic address object. type: str more...
      • hw-model - Dynamic address matching hardware model. type: str more...
      • hw-vendor - Dynamic address matching hardware vendor. type: str more...
      • os - Dynamic address matching operating system. type: str more...
      • route-tag - route-tag address. type: int more...
      • sw-version - Dynamic address matching software version. type: str more...
    • end-ip - Final IP address (inclusive) in the range for the address. type: str more...
    • epg-name - Endpoint group name. type: str more...
    • filter - Match criteria filter. type: str more...
    • fqdn - Fully Qualified Domain Name address. type: str more...
    • list - List. type: array more...
      • ip - IP. type: str more...
      • net-id - Network ID. type: str more...
      • obj-id - Object ID. type: str more...
    • name - Address name. type: str more...
    • obj-id - Object ID for NSX. type: str more...
    • organization - Organization domain name (Syntax: organization/domain). type: str more...
    • policy-group - Policy group name. type: str more...
    • sdn - SDN. type: str choices: [aci, aws, nsx, nuage, azure, gcp, oci, openstack] more...
    • sdn-tag - SDN Tag. type: str more...
    • start-ip - First IP address (inclusive) in the range for the address. type: str more...
    • subnet - IP address and subnet mask of address. type: str more...
    • subnet-name - Subnet name. type: str more...
    • tagging - Tagging. type: array more...
      • category - Tag category. type: str more...
      • name - Tagging entry name. type: str more...
      • tags - Tags. type: str more...
    • tenant - Tenant. type: str more...
    • type - Type of address. type: str choices: [ipmask, iprange, fqdn, wildcard, geography, wildcard-fqdn, dynamic]
    • uuid - Universally Unique Identifier (UUID; automatically assigned but can be manually reset). type: str more...
    • visibility - Enable/disable address visibility in the GUI. type: str choices: [disable, enable] more...
    • wildcard - IP address and wildcard netmask. type: str more...
    • wildcard-fqdn - Fully Qualified Domain Name with wildcard characters. type: str more...
    • end-mac - Last MAC address in the range. type: str more...
    • interface - Name of interface whose IP address is to be used. type: str more...
    • sdn-addr-type - Type of addresses to collect. type: str choices: [private, public, all] more...
    • start-mac - First MAC address in the range. type: str more...
    • tags - Names of object-tags applied to address. type: str more...
    • profile-list - No description for the parameter type: array more...
      • profile-id - NSX service profile ID. type: int more...
    • _image-base64 - _Image-Base64. type: str more...
    • clearpass-spt - SPT (System Posture Token) value. type: str choices: [unknown, healthy, quarantine, checkup, transition, infected, transient] more...
    • fsso-group - FSSO group(s). type: str more...
    • sub-type - Sub-type of address. type: str choices: [sdn, clearpass-spt, fsso, ems-tag, swc-tag, fortivoice-tag, fortinac-tag, fortipolicy-tag, device-identification] more...
    • global-object - Global Object. type: int more...
    • obj-tag - Tag of dynamic address object. type: str more...
    • obj-type - Object type. type: str choices: [ip, mac] more...
    • fabric-object - Security Fabric global object setting. type: str choices: [disable, enable] more...
    • macaddr - Multiple MAC address ranges. type: str more...
    • node-ip-only - Enable/disable collection of node addresses only in Kubernetes. type: str choices: [disable, enable] more...
    • dirty - To be deleted address. type: str choices: [dirty, clean] more...
    • tag-detection-level - Tag detection level of dynamic address object. type: str more...
    • tag-type - Tag type of dynamic address object. type: str more...
    • hw-model - Dynamic address matching hardware model. type: str more...
    • hw-vendor - Dynamic address matching hardware vendor. type: str more...
    • os - Dynamic address matching operating system. type: str more...
    • route-tag - route-tag address. type: int more...
    • sw-version - Dynamic address matching software version. type: str more...

Notes

Note

  • Running in workspace locking mode is supported in this FortiManager module, the top level parameters workspace_locking_adom and workspace_locking_timeout help do the work.
  • To create or update an object, use state: present directive.
  • To delete an object, use state: absent directive
  • Normally, running one module can fail when a non-zero rc is returned. you can also override the conditions to fail or succeed with parameters rc_failed and rc_succeeded

Examples

- hosts: fortimanager00
  collections:
    - fortinet.fortimanager
  connection: httpapi
  vars:
     ansible_httpapi_use_ssl: True
     ansible_httpapi_validate_certs: False
     ansible_httpapi_port: 443
  tasks:

   - name: Configure IPv4 addresses.
     fmgr_firewall_address:
        bypass_validation: False
        adom: root
        state: present
        firewall_address:
           allow-routing: disable
           associated-interface: any
           name: 'address-orignal'
           visibility: enable
   - name: rename the firewall addressobject
     fmgr_rename:
        rename:
            selector: 'firewall_address'
            self:
             adom: 'root'
             address: 'address-orignal'
            target:
             name: 'address-new'

   - name: delete renamed object
     fmgr_firewall_address:
        adom: 'root'
        state: absent
        firewall_address:
            name: 'address-new'


- hosts: fortimanager00
  collections:
    - fortinet.fortimanager
  connection: httpapi
  vars:
     ansible_httpapi_use_ssl: True
     ansible_httpapi_validate_certs: False
     ansible_httpapi_port: 443
  tasks:
   - name: Configure IPv4 addresses.
     fmgr_firewall_address:
        bypass_validation: False
        adom: ansible
        state: present
        firewall_address:
           allow-routing: disable
           associated-interface: any
           name: 'ansible-test1'
           visibility: disable

- hosts: fortimanager00
  collections:
    - fortinet.fortimanager
  connection: httpapi
  vars:
     ansible_httpapi_use_ssl: True
     ansible_httpapi_validate_certs: False
     ansible_httpapi_port: 443
  tasks:
   - name: create IPv4 addresses.
     fmgr_firewall_address:
        adom: root
        state: present
        firewall_address:
           allow-routing: disable
           associated-interface: any
           name: 'fooaddress'
           visibility: disable
     register: info
     failed_when: info.rc != 0
   - name: create IPv4 addresses.
     fmgr_firewall_address:
        adom: root
        state: present
        firewall_address:
           allow-routing: disable
           associated-interface: any
           name: 'fooaddress'
           visibility: disable
     register: info
     failed_when: info.message != 'Object update skipped!'
   - name: delete created address
     fmgr_firewall_address:
        adom: root
        state: absent
        firewall_address:
            name: 'fooaddress'

- name: gathering fortimanager facts
  hosts: fortimanager00
  gather_facts: no
  connection: httpapi
  collections:
    - fortinet.fortimanager
  vars:
    ansible_httpapi_use_ssl: True
    ansible_httpapi_validate_certs: False
    ansible_httpapi_port: 443
  tasks:
   - name: retrieve all the IPv4 addresses
     fmgr_fact:
       facts:
           selector: 'firewall_address'
           params:
               adom: 'ansible'
               address: 'your_value'

Return Values

Common return values are documented: https://docs.ansible.com/ansible/latest/reference_appendices/common_return_values.html#common-return-values, the following are the fields unique to this module:

  • meta - The result of the request.returned: always type: dict
    • request_url - The full url requested. returned: always type: str sample: /sys/login/user
    • response_code - The status of api request. returned: always type: int sample: 0
    • response_data - The data body of the api response. returned: optional type: list or dict
    • response_message - The descriptive message of the api response. returned: always type: str sample: OK
    • system_information - The information of the target system. returned: always type: dict
  • rc - The status the request. returned: always type: int 0
  • version_check_warning - Warning if the parameters used in the playbook are not supported by the current FortiManager version. returned: if at least on parameter mpt supported by the current FortiManager version type: list 0

Status

  • This module is not guaranteed to have a backwards compatible interface.

Authors

  • Xinwei Du (@dux-fortinet)
  • Xing Li (@lix-fortinet)
  • Jie Xue (@JieX19)
  • Link Zheng (@chillancezen)
  • Frank Shen (@fshen01)
  • Hongbin Lu (@fgtdev-hblu)

Hint

If you notice any issues in this documentation, you can create a pull request to improve it.