fmgr_devprof_system_snmp_community_obj – SNMP community configuration.¶
New in version 2.10.
Synopsis¶
- This module is able to configure a FortiManager device by allowing the user to [clone, delete, get, set, update] the following FortiManager json-rpc urls.
- /pm/config/adom/{adom}/devprof/{devprof}/system/snmp/community/{community}
- Examples include all parameters and values need to be adjusted to data sources before usage.
- Tested with FortiManager v6.0.0
Requirements¶
The below requirements are needed on the host that executes this module.
- ansible>=2.10.0
Parameters¶
- loose_validation - Do parameter validation in a loose way type: bool required: false default: false
- workspace_locking_adom - Acquire the workspace lock if FortiManager is running in workspace mode type: str required: false choices: global, custom dom
- workspace_locking_timeout - The maximum time in seconds to wait for other users to release workspace lock type: integer required: false default: 300
- url_params - parameters in url path type: dict required: true
- adom - the domain prefix type: str choices: none, global, custom dom
- devprof - the object name type: str
- community - the object name type: str
- parameters for method: [clone, set, update] - SNMP community configuration.
- data - No description for the parameter type: dict
- events - No description for the parameter type: array
- {no-name} - No description for the parameter type: str choices: [cpu-high, mem-low, log-full, intf-ip, vpn-tun-up, vpn-tun-down, ha-switch, ha-hb-failure, ips-signature, ips-anomaly, av-virus, av-oversize, av-pattern, av-fragmented, fm-if-change, fm-conf-change, temperature-high, voltage-alert, ha-member-up, ha-member-down, ent-conf-change, av-conserve, av-bypass, av-oversize-passed, av-oversize-blocked, ips-pkg-update, power-supply-failure, amc-bypass, faz-disconnect, fan-failure, bgp-established, bgp-backward-transition, wc-ap-up, wc-ap-down, fswctl-session-up, fswctl-session-down, ips-fail-open, load-balance-real-server-down, device-new, enter-intf-bypass, exit-intf-bypass, per-cpu-high, power-blade-down, confsync_failure]
- hosts - No description for the parameter type: array
- ha-direct - Enable/disable direct management of HA cluster members. type: str choices: [disable, enable]
- host-type - Control whether the SNMP manager sends SNMP queries, receives SNMP traps, or both. type: str choices: [any, query, trap]
- id - Host entry ID. type: int
- ip - IPv4 address of the SNMP manager (host). type: str
- source-ip - Source IPv4 address for SNMP traps. type: str
- hosts6 - No description for the parameter type: array
- ha-direct - Enable/disable direct management of HA cluster members. type: str choices: [disable, enable]
- host-type - Control whether the SNMP manager sends SNMP queries, receives SNMP traps, or both. type: str choices: [any, query, trap]
- id - Host6 entry ID. type: int
- ipv6 - SNMP manager IPv6 address prefix. type: str
- source-ipv6 - Source IPv6 address for SNMP traps. type: str
- id - Community ID. type: int
- name - Community name. type: str
- query-v1-port - SNMP v1 query port (default = 161). type: int
- query-v1-status - Enable/disable SNMP v1 queries. type: str choices: [disable, enable]
- query-v2c-port - SNMP v2c query port (default = 161). type: int
- query-v2c-status - Enable/disable SNMP v2c queries. type: str choices: [disable, enable]
- status - Enable/disable this SNMP community. type: str choices: [disable, enable]
- trap-v1-lport - SNMP v1 trap local port (default = 162). type: int
- trap-v1-rport - SNMP v1 trap remote port (default = 162). type: int
- trap-v1-status - Enable/disable SNMP v1 traps. type: str choices: [disable, enable]
- trap-v2c-lport - SNMP v2c trap local port (default = 162). type: int
- trap-v2c-rport - SNMP v2c trap remote port (default = 162). type: int
- trap-v2c-status - Enable/disable SNMP v2c traps. type: str choices: [disable, enable]
- events - No description for the parameter type: array
- parameters for method: [delete] - SNMP community configuration.
- parameters for method: [get] - SNMP community configuration.
- option - Set fetch option for the request. type: str choices: [object member, chksum, datasrc]
Notes¶
Note
- The module may supports multiple method, every method has different parameters definition
- One method may also have more than one parameter definition collection, each collection is dedicated to one API endpoint
- The module may include domain dependent urls, the domain can be specified in url_params as adom
- To run in workspace mode, the paremeter workspace_locking_adom must be included in the task
Examples¶
- hosts: fortimanager-inventory
collections:
- fortinet.fortimanager
connection: httpapi
vars:
ansible_httpapi_use_ssl: True
ansible_httpapi_validate_certs: False
ansible_httpapi_port: 443
tasks:
- name: REQUESTING /PM/CONFIG/DEVPROF/{DEVPROF}/SYSTEM/SNMP/COMMUNITY/{COMMUNITY}
fmgr_devprof_system_snmp_community_obj:
loose_validation: False
workspace_locking_adom: <value in [global, custom adom]>
workspace_locking_timeout: 300
method: <value in [clone, set, update]>
url_params:
adom: <value in [none, global, custom dom]>
devprof: <value of string>
community: <value of string>
params:
-
data:
events:
- <value in [cpu-high, mem-low, log-full, ...]>
hosts:
-
ha-direct: <value in [disable, enable]>
host-type: <value in [any, query, trap]>
id: <value of integer>
ip: <value of string>
source-ip: <value of string>
hosts6:
-
ha-direct: <value in [disable, enable]>
host-type: <value in [any, query, trap]>
id: <value of integer>
ipv6: <value of string>
source-ipv6: <value of string>
id: <value of integer>
name: <value of string>
query-v1-port: <value of integer>
query-v1-status: <value in [disable, enable]>
query-v2c-port: <value of integer>
query-v2c-status: <value in [disable, enable]>
status: <value in [disable, enable]>
trap-v1-lport: <value of integer>
trap-v1-rport: <value of integer>
trap-v1-status: <value in [disable, enable]>
trap-v2c-lport: <value of integer>
trap-v2c-rport: <value of integer>
trap-v2c-status: <value in [disable, enable]>
- name: REQUESTING /PM/CONFIG/DEVPROF/{DEVPROF}/SYSTEM/SNMP/COMMUNITY/{COMMUNITY}
fmgr_devprof_system_snmp_community_obj:
loose_validation: False
workspace_locking_adom: <value in [global, custom adom]>
workspace_locking_timeout: 300
method: <value in [get]>
url_params:
adom: <value in [none, global, custom dom]>
devprof: <value of string>
community: <value of string>
params:
-
option: <value in [object member, chksum, datasrc]>
Return Values¶
Common return values are documented: https://docs.ansible.com/ansible/latest/reference_appendices/common_return_values.html#common-return-values, the following are the fields unique to this module:
- return values for method: [clone, set, update]
- data
- No description for the parameter type: dict
- id - Community ID. type: int
- status
- No description for the parameter type: dict
- code - No description for the parameter type: int
- message - No description for the parameter type: str
- url - No description for the parameter type: str example: /pm/config/adom/{adom}/devprof/{devprof}/system/snmp/community/{community}
- return values for method: [delete]
- status
- No description for the parameter type: dict
- code - No description for the parameter type: int
- message - No description for the parameter type: str
- url - No description for the parameter type: str example: /pm/config/adom/{adom}/devprof/{devprof}/system/snmp/community/{community}
- return values for method: [get]
- data
- No description for the parameter type: dict
- events - No description for the parameter type: array
- {no-name} - No description for the parameter type: str
- hosts - No description for the parameter type: array
- ha-direct - Enable/disable direct management of HA cluster members. type: str
- host-type - Control whether the SNMP manager sends SNMP queries, receives SNMP traps, or both. type: str
- id - Host entry ID. type: int
- ip - IPv4 address of the SNMP manager (host). type: str
- source-ip - Source IPv4 address for SNMP traps. type: str
- hosts6 - No description for the parameter type: array
- ha-direct - Enable/disable direct management of HA cluster members. type: str
- host-type - Control whether the SNMP manager sends SNMP queries, receives SNMP traps, or both. type: str
- id - Host6 entry ID. type: int
- ipv6 - SNMP manager IPv6 address prefix. type: str
- source-ipv6 - Source IPv6 address for SNMP traps. type: str
- id - Community ID. type: int
- name - Community name. type: str
- query-v1-port - SNMP v1 query port (default = 161). type: int
- query-v1-status - Enable/disable SNMP v1 queries. type: str
- query-v2c-port - SNMP v2c query port (default = 161). type: int
- query-v2c-status - Enable/disable SNMP v2c queries. type: str
- status - Enable/disable this SNMP community. type: str
- trap-v1-lport - SNMP v1 trap local port (default = 162). type: int
- trap-v1-rport - SNMP v1 trap remote port (default = 162). type: int
- trap-v1-status - Enable/disable SNMP v1 traps. type: str
- trap-v2c-lport - SNMP v2c trap local port (default = 162). type: int
- trap-v2c-rport - SNMP v2c trap remote port (default = 162). type: int
- trap-v2c-status - Enable/disable SNMP v2c traps. type: str
- events - No description for the parameter type: array
- status
- No description for the parameter type: dict
- code - No description for the parameter type: int
- message - No description for the parameter type: str
- url - No description for the parameter type: str example: /pm/config/adom/{adom}/devprof/{devprof}/system/snmp/community/{community}